lvs:environment
lvs構築
- インストール
yum install --exclude=*.i386 ipvsadm iproute curl keepalived
- arp
less /etc/sysctl.conf net.ipv4.conf.lo.arp_ignore = 1 net.ipv4.conf.lo.arp_announce = 2 net.ipv4.conf.eth0.arp_ignore=1 net.ipv4.conf.eth0.arp_announce=2 sysctl -p
- lo:0
vi /etc/sysconfig/network-scripts/ifcfg-lo:0 DEVICE=lo:0 IPADDR=192.168.24.183 ←lvsのvip NETMASK=255.255.255.255 NETWORK=192.168.24.0 BROADCAST=192.168.24.255 ONBOOT=yes NAME=loopback /etc/init.d/network restart
- keepalived.conf
vi /etc/keepalived/keepalived.conf # # Configuration File for keepalived # global_defs { notification_email { taro@clown.com } notification_email_from keepalived@clown smtp_server 127.0.0.1 smtp_connect_timeout 30 router_id moca_lvs_0 } vrrp_instance VI_1 { state BACKUP interface eth0 virtual_router_id 51 priority 100 advert_int 1 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 192.168.24.183 } } # for MySQL Slave service virtual_server 192.168.24.183 3306 { delay_loop 1 lb_algo wrr lb_kind DR nat_mask 255.255.255.0 persistence_timeout 50 protocol TCP real_server 192.168.24.233 3306 { weight 100 inhibit_on_failure TCP_CHECK { connect_port 3306 connect_timeout 15 } # TCP_CHECK } # real_server real_server 192.168.24.234 3306 { weight 100 inhibit_on_failure TCP_CHECK { connect_port 3306 connect_timeout 15 } # TCP_CHECK } # real_server } # for Kyototycoon service virtual_server 192.168.24.183 11221 { delay_loop 1 #lvs_sched wlc lvs_sched wrr lvs_method DR protocol TCP # sorry server # KT standby server sorry_server 192.168.24.230 11221 real_server 192.168.24.229 11221 { weight 100 inhibit_on_failure TCP_CHECK { connect_port 11221 connect_timeout 15 } # TCP_CHECK } # real_server } # virtual_server
- keepalived start
/etc/init.d/keepalived start
lvs/environment.txt · 最終更新: 2014/02/26 03:11 by clownclown