====== USB support for ESX_ESXi 4.1  ======

====== Main  ======

Adding a USB controller and a USB device

To add a USB controller in a virtual machine running Windows:
  - Right-click the virtual machine and click Edit Settings.
  - Click Add.
  - Select USB Controller and click Next.
  - Click OK.
  - Go to Control Panel > Administrative Tools > Disk Management.
  - Right-click the USB disk and assign a letter.

To add a USB device:
  - Right-click the virtual machine and click Edit Settings.
  - Click Add.
  - Select USB Device and click Next.

<code>
Note: To support vMotion, select Support vMotion while device is connected. For more information, see the Configuring USB Passthrough Devices for vMotion section of the vSphere Virtual Machine Administration Guide.

</code>
  - Click OK.

====== Update  ======

<code>
# esxcli software vib install -d /vmfs/volumes/hdd/Data/ESXi500-201109001.zip
</code>

<code>
Installation Result
  Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.
  Reboot Required: true
</code>

<code>
# esxcli software vib install -d /vmfs/volumes/hdd/Data/VMware-ESXi-5.1.0-799733-depot.zip
</code>